Smoker Controller for 120V/240V AC (Up to 20 Amp, 4800 Watt)

  • Model: WS-2000F-SMD

Ask a Question

Starting at: $329.99

Please Choose:





Input Power Cord Option






Output Connector Option




Add to Cart:

This plug-and-play PID temperature controller is designed to control the temperature of larger smokers powered by 120/240 VAC. Up to 4800 watts heating element can be used.  It has two temperature probes: one for controlling the smoker cabinet temperature and one for monitoring the food temperature. 

This built-in controller module uses a PID algorithm to automatically adjust power to the heater to compensate for disturbances from sunlight and wind. It can hold the smoking temperature within one degree of set temperature. The temperature setting is programmable up to 6 steps. The first temperature probe is used to control the temperature of smoker cabinet. The second pointed probe can be inserted into the food to monitor internal temperature. The ending criteria of each step can be determined either by preset time or preset internal food temperature.  For cooking small sized foods or smoking the surface of the food, users can use the preset time as a reference point to finish the step. Using the internal temperature as the reference point is important for cooking large size food because it is difficult to know how much time is needed. For example: You can program the temperature to start at 120F for 1.5 hour of smoking, rise to 132F for 2.5 hours and finish at 190F until the internal temperature reaches 170F. Then, the controller can either turn on a buzzer to let you know the food is ready, or drop the temperature to a lower set point to keep the food warm until you are ready to serve it. This will save you time waiting by the smoker to change the settings manually when each step is finished. The program function can also been turned off so that user can use it as single set point controller for simple operation. The controller has the ability to store up to 8 temperature profiles for different recipes, so you can save your favorite settings for the next time you cook.

This controller has comes with two probes: Probe 1, which measures the temperature in the smoker cabinet, and Probe 2, which measures the food internal temperature (WS-SENSOR12B).

For Probe 1, you can choose from one of the following probes with different mounting method: the free hanging probe (WS-SENSOR10B), wall-mount probe (WS-SENSOR11B) and clip-on probe (WS-SENSOR13B). The free hanging probe can be fed through the venting hole on the smoker; the wall-mount sensor has a pair of Nylon screw and nut so the probe can be tightened to the wall of a smoker; Clip-on sensor comes with an alligator clip that can be clipped on to the smoker grill or a frame. By default, we ship the free hanging probe as Probe 1.  

Power supply options:
 
We currently offer 3 different models for different customers:
 
Model 2: It is designed for North America 120V AC power line only, and output power is rated as 20 Amp. The maximum power it can drive is 2400W. The input socket is IEC C20 and output socket NEMA 5-20R. For this model, its compatible input power cable option is 5-20P to C19.
 
Model 4: It is designed for North America 240V AC power line only, and output power is rated as 20 Amp. The maximum power it can drive is 4800W. The input socket is IEC C20 and output socket IEC C19. For this model, its compatible input power cable option is L6-20P to C19. C20 male plug option is also available.
 
Model 5: It is designed for Europe 220V AC power line only, and output power is rated as 16 Amp. The maximum power it can drive is 3500W. The input socket is IEC C20 and output socket IEC C19. C20 male plug option is also available.

Model comparison table:

Model Power Rating Input Socket Output Socket Input Power Cord (Optional)
2 US 20A, 120V C20 5-20R 5-20P-C19, 12AWG 8 ft; or C-19 plug
4 US 20A, 240V C20 C19 L6-20P-C19, 12AWG 8 ft; or C-19 plug
5 EU 16A, 220V C20 C19 C-19 plug

 
Note:
1. Lead time for this product is 2-3 business days. Please contact us if you have any questions or customized project needs.
2. Due to limited space of back panel, external relay R1 and R2 are not available for this model. Please check here.
3. Please keep the sensor plug dry. Please DO NOT wash it or expose it to rain. Doing so may lead to inaccurate or unstable temperature reading.
4. Input power cord is not included. Please check power cord option above if you need. 
5. IEC C19 Plug (for input power cord) and IEC C20 Plug (for output power cord) are also available in option.
6. Warranty: This product is under one (1) year limited warranty.
7. Optional mounting bracket is offered, so this controller can be mounted to the side wall. See here for details. 

Click here to download instruction manual.
Click here for common errors. 

WS-2000F-SMD controller Back view of the model 2. 
IEC C20 Power Input Socket. 
NEMA5-20R Power Output Socket.
 Back view of the model 4. 
IEC C20 Power Input Socket. 
IEC C19 Power Output Socket.
Back view of the model 5. 
IEC C20 Power Input Socket. 
IEC C19 Power Output Socket.

This product was added to our catalog on Thursday 26 January, 2017.

Copyright © 2024 auberins.com.